Please note: The labour cost for a Melag Technician to perform Install Qualification (IQ), Operational Qualification (OQ), Freight for the Washer Disinfector, travel for the Melag technician and the Performance Qualification (PQ) are at the purchasers expense.
To see a quick guide on pre-install requirements click here
We strongly recommend adding on a water stop valve to the installation.
To find a guide on what set up of accessories is right for you take a look at the Melatherm packages, Or to work out what is the best fit for you, try this. To request a sample box of accessories click here
Each unit may require a Meladem 53 or 53C for treated water depending on the type of practice you have- sold separately. The Melatherm requires Salt on installation and periodically through its life.
Units can be networked along with the Evolution & Cliniclave series autoclaves directly to your computer to download data logs with a free FTP software.
MELAtherm® 20 is available in versions 400 volt (three phase current, MELAtherm® 20 DTA and 230 volt. If the installation location permits connection to a 400 volt power supply, we recommend the three phase due to its significantly lower operating times.
*Please note cycle times shown in the pictures are stated without drying time included. Please add the drying time on top to know the total cycle time.
